Do All Toilets Fit The Same?

Are all toilets interchangeable?

Most toilets are interchangeable with one another, and can be easily replaced as a DIY project or as part of a bathroom remodeling project or as an independent home improvement project.

Toilets also come in a range of seat heights and there are two basic bowl configurations, standard and elongated..

Are toilet sizes universal?

The standard rough-in dimensions for toilets is 12-inches, but a distance of 10- or 14-inches is occasionally found in small bathrooms or older homes. … Elongated toilet bowls measure up to 31-inches from the wall behind the toilet to the front of the bowl. Round toilet bowls extend up to 28-inches from the wall.

Should I buy an elongated or round toilet?

Most people find elongated toilet bowls to be more comfortable, but in a small bathroom, a round bowl can save space. Elongated toilet bowls measure up to 31″ from the wall, while round fixtures max out at 28″. Because round bowls are less expensive than elongated bowls, they save a few dollars, too.

Do you need a plumber to install a new toilet?

Our research team found that a plumber usually requires an hour or two to install a toilet. The process generally includes: … Draining the old toilet, removing it and inspecting the flange — which connects the toilet to the drainpipe on the floor — to see whether repairs are needed.

How much does it cost to install a new toilet?

On average, a standard toilet installation costs between $122 and $228 with most homeowners spending around $150 to $180. This does not include the price of the toilet which averages $99 to $199 for a total toilet replacement cost of $221 to $427. Get free estimates from plumbers near you.

How tight should toilet bolts be?

The toilet bolts should not be overtightened, but they should be tight. If you hear the sound of metal on porcelain, stop tightening. But if you still feel the bolts tightening against the wax ring, keep going.

Can you replace toilet bolts without removing toilet?

You can’t replace a closet bolt without removing the bowl. Pull the bowl, and next time pick up brass bolts.

How do I know what size toilet I need?

Make sure the toilet dimensions will fit your space. Start by measuring the rough-in size. This is the distance between the wall behind the toilet and the center of the drainpipe or the bolts that hold the toilet to the floor. It’s best to perform this measurement before you remove the old toilet.

Can I replace a toilet myself?

Replacing or installing a new toilet isn’t as hard as it may sound. All you really need are a few hours of time and the right tools for the job. So, gather up your new toilet, replacement wax ring, rubber gloves, hacksaw, a putty knife, adjustable wrenches, plunger, a bucket and some old rags.

Why are elongated toilets better?

For elongated toilets, the consensus seems to be that they are much more comfortable for adults. The shape of the bowl is much better for men as well, giving them extra space where they need it most. Men also appreciate the sloped angle inside the bowl that helps prevent splashback.

Are all toilet bolts the same size?

There are three possible measurement distances you can get from the wall to the toilet bolt: 10 inches, 12 inches or 14 inches. The most common is 12 inches. In plumbing terminology, this is called a 12-inch rough. Sometimes these measurements are not exact.

What are toilet bolts called?

closet boltsSecuring your toilet to the floor are two long bolts (called closet bolts) that come up through the base of the toilet and are secured with nuts.

Can an elongated toilet replace a round toilet?

Elongated — This toilet has a slightly longer, egg-shaped bowl for extra comfort. So, in the past the bad news was that if you wanted to replace a round-front toilet with an elongated, in many cases the longer toilet would not fit the space. … An elongated bowl is approx. two inches longer than a round bowl.

How do I know if a new toilet will fit?

It’s a good idea to measure from the bowl to a sidewall just to be sure that the toilet will fit in your space. Choose the shape of your toilet bowl. Usually, toilet bowls are elongated for comfort, but if you have a smaller space you might need a round bowl.

Can a handyman change a toilet?

A qualified handyman, though, can often tackle in one visit several smaller projects that don’t require licensing. … “And even most of the electrical and plumbing we can do without licensing. For plumbing, a license is required if you’re changing lines, but we can install a toilet.